How can we help?

No. Snaplates uses built-in light and motion sensors so the LEDs automatically activate when the vehicle is in use and light levels are low. In daylight or while parked, the unit remains in ultra-low power standby, helping conserve battery power when illumination isn't needed.

Snaplates provides over 32 hours of continuous LED runtime on a full charge. In everyday use, it will typically last much longer because the LEDs only activate when light levels are low. The built-in solar panel provides ongoing top-up charging during daylight, helping extend the time between USB-C charges.

Yes. Snaplates inserts slide in and out in seconds with no tools required, making it easy to switch between L and P plates as the driver progresses from learner to provisional driving.

Snaplates is compact and designed to sit unobtrusively on the windscreen while remaining clearly visible from outside the vehicle. The included positioning guide helps you choose the correct location during installation, keeping the unit clear of the driver's normal field of view.

Snaplates can be recharged via USB-C and features solar-assisted charging, which provides a convenient trickle charge whenever there is sufficient sunlight, helping to top up the battery and extend the time between USB-C charges or using solar.

USB-C is the fastest way to recharge Snaplates, with a full charge from empty taking approximately 2–3 hours. Solar charging varies depending on the amount and intensity of sunlight and is designed primarily to top up and maintain battery charge during everyday use, rather than replace USB-C charging when a full recharge is required.

Switch it on and leave it on! Once switched on, Snaplates can remain on during everyday use. Its built-in motion and light sensors automatically control when the display illuminates, keeping power consumption to a minimum when illumination isn't needed. There's generally no need to switch it off between journeys.

Snaplates charge whether the power switch is ON or OFF, so there's no need to change the switch position when connecting the USB-C cable or using solar.

For normal USB-C charging, simply connect Snaplates to a suitable USB power source. During periods of extreme summer heat, as good practice with rechargeable battery products, avoid leaving Snaplates connected to USB-C in a vehicle parked in direct sunlight for extended periods. In these conditions, we recommend charging indoors or in a cool, shaded location instead.

Your Snaplates has two LED indicator lights on the back of the unit:

Left LED – Power: Illuminates white for a few seconds when the unit is switched on, then automatically turns off. The Snaplates remains powered on and ready for use.

Right LED – Charging: Illuminates red while the unit is charging and changes to green when fully charged.

These indicators make it easy to check your Snaplates' power and charging status at a glance.

Snaplates is designed with Australian L and P plate display requirements in mind. As requirements vary between states and territories, it's important to install and display your plates in accordance with your local road rules.

In NSW, L and P plates must be displayed externally, so Snaplates external holders are required and can be added when ordering your kit.

Each Snaplates insert measures 154 mm × 160 mm and fits within the 160 mm × 163 mm display unit. L and P inserts are designed to meet the required plate dimensions for the applicable Australian state or territory.

Orders are dispatched from Perth, usually within 1 business day. Once your order is on its way, you'll receive an email with tracking details so you can follow its progress.

We offer 30-day returns for eligible items. If Snaplates isn't right for you, contactsupport@snaplates.com.auwithin 30 days of delivery and we'll help arrange your return. See our Shipping & Returns page for full details.